Fender Licensed Pau Ferro Stratocaster/Strat Neck WD SNMCPF

  • $159.95
    Unit price per 
Shipping calculated at checkout.

Genuine WD Music Fender® Licensed Replacement Strat Neck with 22 fret Pau Ferro Fingerboard SNMCPF

Replacement Stratocaster® neck with 22 medium jumbo frets, 12 inch radius, 1 11/16 inch nut width, unfinished. Double action truss rod with headstock adjustment location, Pau Ferro finger board with 10mm peg holes drilled for a modern sealed or diecast tuning machine. Will also accept adapter bushings if you want to retro fit for a vintage look by using Kluson tuning machines. Nut not included.
This neck is made from maple and has a Pau Ferro fingerboard. Pau Ferro (Machaerium villosum or schleroxylon), also known as Morado, Santos Rosewood, or Bolivian Rosewood has many of the qualities that are highly regarded in a fingerboard wood. It's stable, abrasion resistant, hard, attractive, exotic and has good compression strength parallel to the grain.
As with all exotic material, grain, pattern and color can vary from piece to piece. The photographs show are representative only and grain pattern will not be exactly as shown.
All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way. 

All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required. 

We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.
Buy with confidence from SportHiTech.