Genuine WD Music Fender® Licensed Replacement Jazz Bass Fretless Neck JBNEF
Genuine WD Music Fender® Licensed Replacement Jazz Bass Fretless Neck JBNEF NEW
This Fender® Replacement Jazz Bass® neck is designed for converting or replacing a standard USA spec Fender® fretless Jazz Bass. The truss rod located in the vintage heel position allows you to maintain a vintage appearance while you have the unique smooth tone and feel of fretless action. Side dot markers are located on the low E side of the neck for easy yet discreet reference. This is an absolutely awesome replacement or conversion piece for your Fender® Jazz bass. Made in Europe.
Important Specs and Dimensions
Heel Width = 2 1/2 in.
Heel overall height = 1 5/64 in.
Nut Width = 1 1/2 in.
1st Fret neck depth = .793 in.
12th Fret neck depth = .921 in.
Fret board Material = Ebony
Neck Material = Maple
Radius = 12 in.
Truss rod adjustment location = Heel
Finish = Ultra thin Clear satin poly
Fret count = 21 fret length with overhang
Peg Hole size = 21/32 in. (16.6mm) not a stepped hole
IMPORTANT PLEASE READ MANUFACTURER NOTICE BELOW CAREFULLY:
All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.