Genuine WD Music Fender Licensed Tele Neck - Maple TNMCM
Genuine WD Music Fender® Licensed Replacement Maple Tele® Neck TNMCM
Replacement Telecaster® neck, 22 medium jumbo frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster®. Nut not included.
- Fingerboard Radius = 12 in.
- Nut Width = 1 11/16 in.
- Profile Shape = Modern C-Shape
- Fret type and count = Medium 6150 / 22 frets
- Tuner peghole size = 25/64 in.
- Binding = none
- Neck Finish = Super thin satin Poly
- Truss Rod location = headstock
- Truss Rod Type = Double Action
- Skunk Stripe = no
- Neck and Fretboard Type = two-piece Maple
- Heel Type = Standard Telecaster
- Orientation = Right-handed
- 1st Fret Thickness = 0.86 in.
- 12th Fret Thickness = .91 in.
- Fret Marker = Black Dot
IMPORTANT PLEASE READ MANUFACTURER NOTICE BELOW CAREFULLY:
All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.