Genuine WD Music Fender Licensed Vintage Rosewood Strat Fat Neck SNFDR
Genuine WD Music Fender® Licensed Replacement Vintage Rosewood Strat Fat Neck SNFDR
Brand New! WD's newest Fender® Licensed neck design is based on an early 1960's Stratocaster® to give you a real fat C-shaped contour and fill your hand. They say more mass equals more sustain and if that is the case, being almost an inch thick from the 1st fret through the 12th fret should give you the added sustain you're looking for! Available in maple with maple or rosewood fretboards unfinished so you can use the finish you want. Nut not included.
IMPORTANT PLEASE READ MANUFACTURER NOTICE BELOW CAREFULLY:
All necks require a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you. WD contemporary style (22 fret) necks have a double action truss rod which adjusts both front and back bow while the vintage necks use a vintage-correct heel-adjustable single action truss rod which adjusts only 1 way.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.
All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.
We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.
Fingerboard Radius = 10 in.
Nut Width = 1 5/8 in.
Profile Shape = U-Shape
Fret type and count = Medium 6150 / 21 frets
Tuner peghole size = 11/32 in.
Binding = none
Neck Finish = unfinished
Truss Rod location = heel
Skunk Stripe = no
Neck and Fretboard Type = Maple / Rosewood
Heel Type = Standard Stratocaster
Orientation = Right-handed
1st Fret Thickness = 0.93 in.
12th Fret Thickness = 0.99 in.
Fret Marker = Pearloid Dot