Fender Player Series Jazz Bass Neck, Pau Ferro, 9.5" Radius

$299.99
Unit price per

Shipping calculated at checkout.

Fender Player Series Jazz Bass Neck, Pau Ferro, 9.5" Radius
Manufacturers Part No: 099-4903-921

Crafted at Fender's Ensenada, Mexico, manufacturing facility, this genuine Fender Player Series Jazz Bass guitar neck features a comfortable "modern C" profile and 9.5"-radius maple or pau ferro fingerboard with 20 medium jumbo frets.

The nut is pre-slotted with "pilot" string location grooves to make spacing a breeze when performing the final string slot filing, and a satin finish on the back offers smooth playability. For true Fender authenticity, it's also serialized and stamped, with a genuine spaghetti logo headstock decal.

This replacement neck is for a Fender or Squier by Fender guitar.

Neck Material: Maple with Walnut Stripe
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Neck Shape: Modern "C"
Neck Thickness: 1st Fret - .800" (20.32 mm), 12th Fret - .900" (22.86 mm)
Neck Mounting: 4-Bolt
Fingerboard Radius: 9.5" (241 mm)
Fingerboard Material: Pau Ferro
Position Inlays: White Dot
Side Dots: White
Number of Frets: 20
Truss Rod: Single Action, Head Adjust
Truss Rod Nut: 3/16" Hex Adjustment
String Nut: Synthetic Bone
Nut Width: 1.5" (38.1 mm)
Nut Material: Synthetic Bone
Headstock Thickness: .540” (13.71 mm)
Peg Hole Diameter: .734” (18.64 mm)
Fret Size: Medium Jumbo
Scale Length: 34" (86.36 cm)

IMPORTANT PLEASE READ NOTICE BELOW CAREFULLY:

All necks require nut slot adjustment and a minor level and polish and may need to be fine-tuned for your instrument. This is perfectly normal and not a defect. Because of the variety of set up preferences out there, we leave that to you.

All necks should be carefully inspected prior to installation and/or modification as the neck is rendered non-returnable once altered. All wood is considered unique with individual growth patterns. Some necks may have minor grain variations due to the organic nature of wood. These are not seconds or "blems". Please contact customer service if you have any questions or concerns about your neck when it arrives. We cannot guarantee exact neck pocket fit due to varying manufacturer tolerances, wood shrinkage or expansion over time etc. Some neck pocket modification may be required.

We recommend that if you are not familiar with the proper steps to replace a guitar or bass neck that you should contact a professional for assistance.

Buy with confidence from SportHiTech, an authorized Fender Parts Dealer